Training Voucher - Eligible Courses

The Work Safely at Heights course is designed for participants who could be required to undertake activities that will require them to work above 1.5metres from ground level and where fall protection measures are required. The course is designed to expose participants who work at height to a broad range of height risk situations and to correctly implement a safe working procedure. Upon completion of this course, participants will be competent to work at height using applicable fall protective equipment in line with Workplace Health and Safety guidelines.

Training Course Provider:

Western Riverina Community College
23 Hickey Street
GRIFFITH NSW 2680

Venue: 3 Hickey Cres Griffith NSW 2680

State: NSW

Cost: $400.00

Notes: If Western Riverina Community College (WRCC) cancels a course: fees will be fully refunded within fourteen (14) days of course cancellation. Course fees will be refunded if advice of withdrawal is received seven (7) days before commencement of course. A $25.00 administration charge will apply.

The course relates to a unit which specifies the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) where the length of the boom is 11 metres or more in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a Risk Work Licence (HRWL) to operate this plant. Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated. The unit of competence will see the student complete theory work and also participate in practical tasks operating the Elevating work platform in a work situation. The student will plan the work, setup and prepare to complete the work, carryout the work followed by packing up the machine and work area.

Training Course Provider:

Western Riverina Community College

23 Hickey Street

GRIFFITH NSW 2680

Venue: 3 Wade Ave Leeton NSW 2705

State: NSW

Cost: $950.00

Notes: If Western Riverina Community College (WRCC) cancels a course: fees will be fully refunded within fourteen (14) days of course cancellation. Course fees will be refunded if advice of withdrawal is received seven (7) days before commencement of course. A $25.00 administration charge will apply.

The course relates to a unit which specifies the skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) where the length of the boom is 11 metres or more in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a Risk Work Licence (HRWL) to operate this plant. Boom-type elevating work platform means a telescoping device, hinged device, or articulated device, or any combination of these, used to support a platform on which personnel, equipment and materials may be elevated. The unit of competence will see the student complete theory work and also participate in practical tasks operating the Elevating work platform in a work situation. The student will plan the work, setup and prepare to complete the work, carryout the work followed by packing up the machine and work area.

Training Course Provider:

Western Riverina Community College

23 Hickey Street

GRIFFITH NSW 2680

Venue: 23 Hickey Cres Griffith NSW 2680

State: NSW

Cost: $850.00

Notes: If Western Riverina Community College (WRCC) cancels a course: fees will be fully refunded within fourteen (14) days of course cancellation. Course fees will be refunded if advice of withdrawal is received seven (7) days before commencement of course. A $25.00 administration charge will apply.

This course prepares learners to operate and conduct work activities from an elevating work platform (EWP) with a boom length over 11m. An EWP can be telescopic, hinged, articulated, or a combination of these, used to support a platform from which people, equipment or materials can be elevated to perform work. Participants will learn how to set-up, operate, shut-down and secure the EWP. This is a nationally accredited qualification that is recognised in all states and territories of Australia. The course is based on the requirements of the National Standard for Licensing Persons Performing High-Risk Work. Learners who successfully complete the training will become eligible to apply for a High-Risk Work Licence (HRWL).

Training Course Provider:

CEPUTEC (CEPU (Plumbing Division) Education and Training Centre Ltd)

1000 Old Windsor Road

GLENWOOD NSW 2768

Venue: 1000 Old Windsor Road, Glenwood, NSW 2768

State: NSW

Cost: $595.00

Notes: Cancellation fees may apply, please see https://www.ceputec.edu.au/nsw... for terms and conditions.

An elevating work platform (EWP) is either a telescoping device, hinged device, articulated device, or a combination of these used to support a platform from which personnel, equipment or materials can be elevated to perform work. This course covers the functions required to operate boom-type elevating work platforms with a boom length of 11 metres or more.

• Assessing hazards and planning the work

• Conducting routine checks of equipment

• Setting up the elevating work platform

• Operating the elevating work platform

• Shutting down and securing the elevating work platform

Training Course Provider:

Pinnacle Safety and Training

Unit 1

139 Beaconsfield Street

SILVERWATER NSW 2128

Venue: Various - Sydney

State: NSW

Cost: $595.00

Notes: Check website for course locations: https://www.pinnaclesafety.com... Cancellation fees may apply. Please refer to: https://www.pinnaclesafety.com...

This unit specifies the skills and knowledge required to operate a forklift truck safely in accordance with all relevant legislative requirements. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. Students will be issued a Statement of Attainment within 21 days after completing all Safework and WRCC training and assessment activities. Forklift truck means a powered industrial truck equipped with lifting media made up of a mast and an elevating load carriage to which is attached a pair of fork arms or other attachments that can be raised 900 mm or more above the ground, but does not include a pedestrian-operated truck or a pallet truck. The unit of competence will see the student complete theory work and also participate in practical tasks operating the forklift in a work situation. The student will plan the work, conduct routine checks on a forklift truck, shift loads in a safe manner, and safely shut down and secure equipment after completing operations.

Training Course Provider:

Western Riverina Community College

23 Hickey Street

GRIFFITH NSW 2680

Venue: 23 Hickey Cres Griffith NSW 2680, 3 Wade Ave Leeton NSW 2705

State: NSW

Cost: $770.00

Notes: If Western Riverina Community College (WRCC) cancels a course: fees will be fully refunded within fourteen (14) days of course cancellation. Course fees will be refunded if advice of withdrawal is received seven (7) days before commencement of course. A $25.00 administration charge will apply.

This course prepares learners to safely operate a forklift truck. Participants will learn how to set-up, operate, shut down and secure a forklift truck. A forklift truck is a powered industrial truck equipped with lifting mechanisms made up of a mast and an elevating load carriage to which is attached a pair of fork arms that can be raised 900mm or more above the ground. Note: This does not include a pedestrian-operated truck or a pallet truck. This is a nationally accredited qualification that is recognised in all states and territories of Australia. The course is based on the requirements of the National Standard for Licensing Persons Performing High Risk Work. Learners who successfully complete the training will become eligible to apply for a High Risk Work Licence (HRWL).

Training Course Provider:

CEPUTEC (CEPU (Plumbing Division) Education and Training Centre Ltd)

1000 Old Windsor Road

GLENWOOD NSW 2768

Venue: 1000 Old Windsor Road, Glenwood, NSW 2768

State: NSW

Cost: $530.00

Notes: Cancellation fees may apply, please see https://www.ceputec.edu.au/nsw... for terms and conditions.

• Licensing, legislative, regulatory and certification requirements that apply in NSW
• Plan Work, Hazard Identification and Control Measures
• Select & Inspect Equipment and Safety requirements
• Prepare site and equipment
• Techniques related to essential tasks such as the correct fitting of harnesses, the correct use of ladders, lanyards, and anchor straps.

Training Course Provider:

Tower Crane Training (TCT)

11 Watsford Road

CAMPBELLTOWN NSW 2560

Venue: 11 Watsford Rd Campbelltown 2560

State: NSW

Cost: $250.00

Notes: Cancellation fees may apply:

Work safely at heights prepares learners to assess risk and develop safe work methods for working at height. You will learn about current work health and safety (WHS) legislation and how to apply it. This course focuses on preventing situations that may lead to a fall and is particularly focused on common situations found in the construction industry. Training will cover risk assessment, selection and correct use of equipment, rigging and of anchor systems, fall restraint, work positioning, and fall arrest systems.

This is a nationally accredited qualification that is recognised in all states and territories of Australia.

Training Course Provider:

CEPUTEC (CEPU (Plumbing Division) Education and Training Centre Ltd)

1000 Old Windsor Road

GLENWOOD NSW 2768

Venue: 1000 Old Windsor Road, Glenwood, NSW 2768

State: NSW

Cost: $380.00

Notes: Cancellation fees may apply, please see https://www.ceputec.edu.au/nsw... for terms and conditions.

This course covers theoretical and practical aspects of working at height. During the course we will assist you to develop safe work method statements and risk assessments for working at height.

• Regulations and legislation
• Australian Standards
• Risk assessment and hazard elimination
• Equipment selection and use
• Anchor systems, selecting solid and reliable anchorage
• Fall restraint systems, selection of equipment and correct use
• Work positioning systems, selection of equipment and correct use
• Fall arrest systems
• Using energy absorbing lanyards
• Correct use of ladders and ladder safety training

Training Course Provider:

Pinnacle Safety and Training

Unit 1

139 Beaconsfield Street

SILVERWATER NSW 2128

Venue: Various - Sydney

State: NSW

Cost: $239.00

Notes: Check website for course locations: https://www.pinnaclesafety.com... Cancellation fees may apply. Please refer to: https://www.pinnaclesafety.com...

A 4.5 day face-to-face course. This is suitable for students that would like more time to learn and practice, or who have learning barriers.

On successful completion of this course, you will be issued a statement of attainment in:

• HLTAID009 Provide cardiopulmonary resuscitation
• HLTAID010 Provide basic emergency life support
• HLTAID011 Provide First Aid
• HLTAID014 Provide Advanced First Aid
• HLTAID015 Provide advanced resuscitation and oxygen therapy
• HLTAID016 Manage first aid services and resources

Training Course Provider:

St John Ambulance NSW

12 Lyonpark Road

MACQUARIE PARK NSW 2113

Venue: Multiple locations

State: NSW

Cost: $675.00

Notes: St John Ambulance has over 40 training locations in NSW: https://stjohnnsw.com.au/venue.... Cancellation fees may apply. Please go to https://stjohnnsw.com.au/t-c for terms and conditions.

On successful completion of this course, you will be issued a statement of attainment in:

• HLTAID009 Provide cardiopulmonary resuscitation
• HLTAID010 Provide basic emergency life support
• HLTAID011 Provide First Aid
• HLTAID014 Provide Advanced First Aid
• HLTAID015 Provide advanced resuscitation and oxygen therapy
• HLTAID016 Manage first aid services and resources

This course covers:

• Provide first aid content
• Resuscitation including using a soft bag resuscitator
• Oxygen therapy and application of an AED, including equipment maintenance
• Clinical assessment in detail
• Basic anatomy of all body systems
• Triage
• Risk assessment
• Managing all aspects of a first aid room
• Documentation
• Management of: eye injuries, lifting and moving of a casualty, head, neck and spinal injuries including collars and spine board
• Casualties who are emotionally disturbed and under the influence of drugs and alcohol
• Post incident management
• First aid in the context of the workplace
• Relevant first aid legislation
• Planning a response to a major incident
• Evaluating provision of first aid

Training Course Provider:

St John Ambulance NSW

12 Lyonpark Road

MACQUARIE PARK NSW 2113

Venue: Multiple locations

State: NSW

Cost: $550.00

Notes: St John Ambulance has over 40 training locations in NSW: https://stjohnnsw.com.au/venue.... Cancellation fees may apply. Please go to https://stjohnnsw.com.au/t-c for terms and conditions.

• Plan Work, Hazard Identification and Control Measures
• Select and Inspect Equipment & Safety requirements
• Prepare site and equipment
• Calculations of Safe Working Loads, Bearing Area
• Licensing, legislative, regulatory and certification requirements that apply in NSW
• Techniques related to essential tasks

Training Course Provider:

Tower Crane Training (TCT)

11 Watsford Road

CAMPBELLTOWN NSW 2560

Venue: 11 Watsford Rd Campbelltown 2560

State: NSW

Cost: $850.00

Notes: Cancellation fees may apply: https://www.towercranetraining...

This unit specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane / operator. The practical training covers equipment inspections, signalling, slinging methods, rope work and identifying crush zones. *

• Licensing, legislative, regulatory and certification requirements that apply in NSW
• Plan work, hazard identification and control measures
• Select and inspect equipment and safety requirements
• Prepare site and equipment
• Calculations of safe working loads, bearing area
• Site isolation and traffic control responsibilities and authorities
• Identification of communication strategies and systems - hand signals, whistles
• Techniques related to essential tasks
• Shut down job and clean up

Training Course Provider:

Tower Crane Training (TCT)

11 Watsford Road

CAMPBELLTOWN NSW 2560

Venue: 11 Watsford Rd Campbelltown 2560

State: NSW

Cost: $1400.00

Notes: Cancellation fees may apply: https://www.towercranetraining...

The Work Safely at Heights course is designed for participants who could be required to undertake activities that will require them to work above 1.5metres from ground level and where fall protection measures are required.

The course is designed to expose participants who work at height to a broad range of height risk situations and to correctly implement a safe working procedure. Upon completion of this course, participants will be competent to work at height using applicable fall protective equipment in line with Workplace Health and Safety guidelines.

Training Course Provider:

Western Riverina Community College

23 Hickey Street

GRIFFITH NSW 2680

Venue: 3 Wade Ave Leeton NSW 2705

State: NSW

Cost: $500.00

Notes: If Western Riverina Community College (WRCC) cancels a course: fees will be fully refunded within fourteen (14) days of course cancellation. Course fees will be refunded if advice of withdrawal is received seven (7) days before commencement of course. A $25.00 administration charge will apply. Read the full policy below and contact our office to apply for a refund. https://wrcc.nsw.edu.au/wp-con...